HERMAinkprint matt (137)
White inkjet paper with a special matt surface coat, FSC® Mix Credit
Technical data
Grammage | approx. 92 g/m² | ISO 536 |
Caliper | approx. 110 µm | ISO 534 |
Tensile strength MD | approx. 70 N/15 mm | DIN 53112 |
Tensile strength CD | approx. 35 N/15 mm | DIN 53112 |
Stiffness MD | approx. 400 mN | DIN 53121 |
Stiffness CD | approx. 200 mN | DIN 53121 |
Opacity | approx. 92 % | ISO 2471 |
Application and use
The surface of HERMAinkprint matt with its special coat is particularly suitable for inkjet printers (piezo, bubble-jet and memjet technologies). Thanks to its specially designed surface characteristics an outstanding quality of the imprint is achieved on all usual inkjet printers (resolution with photorealistic print up to 1440 dpi).
The pulp for this paper is from FSC® certified forests and other controlled sources.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Regulations concerning contact with food
The paper grade HERMAinkprint matt (137) according to the sample material is physiologically and toxicologically safe and may therefore be used in printers and scales for the marking of goods. However, they m ay only stand in direct contact with those foodstuffs which are washed or peeled before consumption (ISEGA Research and Development Institute, Aschaffenburg).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0