Adhesive 42E
Removable, acrylic based adhesive
Technical data
Tack | medium | |
Peel adhesion | very low (removable) | |
Shear | high | |
Minimum application temperature | -20 °C | |
Service temperature | -40 to 60 °C up to 200 °C for short periods - hot fusing |
Application and use
Adhesive 42E shows good tack and adhesion in combination with soft and clean removability from a wide variety of substrates. Especially on plastic surfaces like PP, PET, ABS 42E can be removed easily. 42E is also suitable for different cardboards and non-coated glass. The adhesive allows label application at a wide temperature range and it retains its removable properties even at low temperatures. 42E features excellent resistance to light, heat and ageing.
Processing
Excellent die-cutting characteristics on all customary machines.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Regulations concerning contact with food
The pressure-sensitive adhesive 42E can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs in accordance with Regulation (EU) No. 10/2011. Furthermore, the adhesive may be used for lamination of plastic films. In this case, cut edge contact with food is harmless as far as above mentioned adhesive is concerned. (Declaration of no objection valid until 15.09.2024)
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0