HERMAsilver matt reverse coated (491)
White label paper, semi-gloss coated with highly opaque aluminium barrier layer on back side
Technical data
Grammage | approx. 83 g/m² | ISO 536 |
Caliper | approx. 60 µm | ISO 534 |
Tensile strength MD | approx. 80 N/15 mm | DIN 53112 |
Tensile strength CD | approx. 40 N/15 mm | DIN 53112 |
Stiffness MD | approx. 170 mN | DIN 53121 |
Stiffness CD | approx. 95 mN | DIN 53121 |
Surface gloss Angle: 60° to the perpendicular | approx. 23 GU | ISO 2813 |
Application and use
The semi-gloss coated surface of "HERMAsilver matt reverse coated" offers good printability in conventional label printing methods (e.g. UV-flexo) as well as in thermal transfer printing. A verification of ink/ribbon suitability is recommended.
Due to its total opacity the material completely obscures the labelled surface. It is highly conformable and may therefore be used on flat as well as on curved surfaces. The aluminium layer on the back side of the label paper serves as barrier and prevents migration of contaminants from the labelled surface or ingredients of the adhesive into the label material.
Therefore "HERMAsilver matt reverse coated" is suitable for the labelling of tyres.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Regulations concerning contact with food
The paper complies with the recommendation BfR XXXVI, the labels produced with it may be in direct contact with dry, non-fatty food. The silver, laquered side may also be in direct contact with moist and fatty foods.
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0