Adhesive 52A

Semi-permanent adhesive, acrylic based

Technical data

Tack medium  
Peel adhesion medium  
Shear very high  
Minimum application temperature 0 °C  
Service temperature -30 to 80 °C up to 200 °C for short periods - hot fusing  

Product information

Adhesive - Issue 12.2023

PDF download

Service Information

Product Code Product Useable width Net width Min. quantity Industries & Application Caliper Grammage Articles in stock Ready for dispatch directly from stock

Application and use

Adhesive 52A shows semi-permanent adhesive characteristics. It is repositionable on most surfaces shortly after labelling, but will become permanent on certain surfaces, especially on cardboard. 52A is highly water-resistant and is particularly resistant to light, heat and ageing.

Processing

Excellent die-cutting characteristics on all usual machines.

Storage conditions and shelf life

Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided. The shelf life up to 4 years from date of production.

Regulations concerning contact with food

All ingredients of the pressure-sensitive adhesive 52A comply with the recommendations FDA 21 CFR 175.105 (Adhesives) and FDA 21 CFR 175.125 (Pressure-sensitive adhesives).

The pressure-sensitive adhesive 52A can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be in direct contact with dry, moist and fatty foodstuff. Furthermore, the adhesive may be used for lamination of various materials. In this case, cut edge contact with food is harmless as far as the above mentioned adhesive is concerned (Declaration of no objection valid until 29.11.2025).

Disclaimer

All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.

HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0

Request sample

Just request your sample of the product via our form.

Is there a way we can support you?
If yes, please contact us.