Adhesive 62Dpo
Permanent opaque adhesive, acrylic based
Technical data
| Tack | high | |
| Peel adhesion | very high | |
| Shear | very high | |
| Minimum application temperature | 0 °C | |
| Service temperature | -30 to 80 °C up to 200 °C for short periods - hot fusing |
Application and use
The adhesive 62Dpo is a permanent coloured all-purpose adhesive with very high opacity. Based on the wide range of applications it can be used in various logistic end uses. Also it can be used on slightly rough and not very curved surfaces. Based on the very high opacity 62Dpo is typically to correct the information, to translate country-specific changes or to avoid read errors e.g. for oversticking barcodes. 62Dpo also has a very good aging, water and light resistance.
Processing
Excellent die-cutting characteristics on all customary machines.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided. The shelf life is 2 years from date of production (dependending on face material).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
