Adhesive 62Gpo
Permanent, opaque adhesive, acrylic based
Technical data
| Tack | very high | |
| Peel adhesion | very high | |
| Shear | very high | |
| Minimum application temperature | -10 °C | |
| Service temperature | -30 to 80 °C up to 200 °C for short periods - hot fusing |
Application and use
The adhesive 62Gpo is a coloured adhesive with very high opacity. By the use of the innovative 2-layer-technology a very high tack even on moist and very cold surfaces can be reached. 62Gpo suits particularly well for labelling of polar and non-polar surfaces such as plastic containers, packaging films and plastic bottles, but also on cardboard and other packaging materials. Less suitable for strongly curved surfaces or tight radii.
Based on the very high opacity 62Gpo is typically to correct the information, to translate country-specific changes or to avoid read errors e.g. for oversticking barcodes.
Once labelled the adhesive is highly waterproof.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Regulations concerning contact with food
All ingredients of adhesive 62Gpo comply with recommendation BfR XIV or FDA 21 CFR 175.105 (Adhesives).
The pressure-sensitive adhesive 62Gpo can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 3 in accordance with Regulation (EU) No. 10/2011 (Declaration of no objection valid until 16.11.2025).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
