Adhesive 63A
Permanent, acrylic based adhesive
Technical data
Tack | high | |
Peel adhesion | high | |
Shear | very high | |
Minimum application temperature | 0 °C | |
Service temperature | -30 to 90 °C |
Application and use
Adhesive 63A has been developed for labelling textiles in combination with HERMAsilk. It is characterized by very high final adhesion, but may be removed from most textile surfaces after a short time without leaving residues. 63A is particularly resistant to light, heat and ageing.
Processing
Good die-cutting characteristics on all usual machines.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided. The shelf life is up to 4 years from date of production.
Regulations concerning contact with food
All ingredients of adhesive 63A comply with recommendations FDA 21 CFR 175.105 and FDA 21 CFR 175.125 (Adhesives).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0