Adhesive 63Gpt

Permanent adhesive, acrylic based

Technical data

Tack very high  
Peel adhesion very high  
Shear very high  
Minimum application temperature -10 °C  
Service temperature -30 to 80 °C  

Product information

Adhesive - Issue 12.2023

PDF download

Service Information

Product Code Product Useable width Net width Min. quantity Industries & Application Caliper Grammage Articles in stock Ready for dispatch directly from stock

Application and use

Adhesive 63Gpt shows excellent tack even on cold and moist surfaces. Due to its high tack the adhesive is particularly suited for labelling surfaces like milk bottles, plastic containers, film wrappings and other packaging materials. Once labelled the adhesive is highly waterproof.

Processing

Excellent die-cutting characteristics on all customary machines.

Storage conditions and shelf life

Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided. The shelf life up to 2 years from date of production (belongs to face material).

Regulations concerning contact with food

All ingredients of adhesive 63Gpt comply with recommendations BfR XIV or FDA 21 CFR 175.105 (Adhesives).

The pressure-sensitive adhesive 63Gpt can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 4 in accordance with Regulation (EU) No. 10/2011 (Declaration of no objection valid until 03.03.2024).

Disclaimer

All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.

HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0

Request sample

Just request your sample of the product via our form.

Is there a way we can support you?
If yes, please contact us.