HERMA PE laser (800)
White, matt, opaque polyethylene film, highly filled with non-abrasive silicates, suitable for laser printers
Technical data
Grammage | approx. 116 g/m² | ISO 536 |
Caliper | approx. 178 µm | ISO 534 |
Tensile stress MD | approx. 10 N/mm² | ISO 527 |
Tensile stress CD | approx. 5 N/mm² | ISO 527 |
Opacity | approx. 95 % | ISO 2471 |
Application and use
HERMA PE laser has been specially designed for laser printers. Printing tests showed excellent results both with monochrome and colour laser printing. In order to avoid soiling of printers due to adhesive bleed, we recommend use of protected edges only, i.e. original edges of the semi-finished rolls should not be adopted for sheet-stock. A possible curvature in machine direction (especially towards the cores) may be adjusted by a "decurl bar" in the press. Due to the large number of printers on the market, we recommend carrying out processing tests in advance. In combination with suitable inks the matt surface of HERMA PE laser offers an excellent printing quality in all conventional printing methods. Best results in flexographic printing may be achieved with water or solvent based inks. Label sheets produced from HERMA PE laser are particularly suitable for tracking and logistics labels as well as for product marking (e.g. for labelling pallets, containers or barrels).
In combination with our acrylic adhesives 64B and 64Z, HERMA PE laser complies with all requirements of BS 5609/II (resistance to sea water).
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0