HERMAtherm PP white 65 (828)

White direct thermal film with protective top coat

Technical data

Grammage approx. 52 g/m² ISO 536
Caliper approx. 67 µm ISO 534
Tensile stress MD approx. 70 N/mm² ISO 527
Tensile stress CD approx. 170 N/mm² ISO 527
Opacity approx. 87 % ISO 2471
Imaging colour black  

Product information

Label material (film) - Issue 09.2023

PDF download

Service Information

Product Code Product Useable width Net width Min. quantity Industries & Application Caliper Grammage Articles in stock Ready for dispatch directly from stock

Application and use

HERMAtherm PP film combines the characteristics of thermal papers with the durability of PP-films.

Printing speeds of up to 200 mm/s are possible in direct thermal printing.

Printing with traditional printing methods like UV flexo or UV offset is also possible. However ink keying of the preprint in wet condition is limited. The inks should be suitable for printing thermal films, consulting of ink supplier is recommended. A corona treatment prior to printing may have a positive effect on ink trapping and ink adhesion.

Web temperature during curing should not exceed 50 °C in order to prevent an early reaction of the thermo reactive ink.

Basically, suitability tests should be performed under customer and application specific conditions.

The thermal print of HERMAtherm PP white 65 features a high water resistance and a limited oil resistance. HERMAtherm PP white 65 does not contain BPA and is suitable for applications where high durability is required such as logistic labels, luggage tags but also for food or meat labels.

Recommended storage

See HERMA website: www.herma.com/material/storage-conditions/

Regulations concerning contact with food

HERMAtherm PP white 65 complies with the legal requirements or recommendations of Regulation (EC) no. 1935/2004 and (EU) no. 10/2011 and subsequent amendments up to Regulation (EC) no. 2017/752 on plastics and articles intended to come into contact with food as well as of Regulation (EC) no. 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food.

The thermal film according to the sample material is physiologically and toxicologically safe when used as intended and may therefore be used in printers and scales for labelling goods. However, it may only stand in direct contact which such kind of foodstuffs which are peeled, shelled or washed before consumption according to experience. (ISEGA Research and Development Institute, Aschaffenburg)

Disclaimer

All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.

HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0

Request sample

Just request your sample of the product via our form.

Is there a way we can support you?
If yes, please contact us.