HERMA PP white digital (877)
White, glossy polypropylene film with special surface treatment for HP-indigo elektroinks
Technical data
Grammage | approx. 44 g/m² | ISO 536 |
Caliper | approx. 58 µm | ISO 534 |
Tensile stress MD | approx. 70 N/mm² | ISO 527 |
Tensile stress CD | approx. 160 N/mm² | ISO 527 |
Surface gloss Angle: 45° to the perpendicular | approx. 60 GU | ISO 2813 |
Opacity | approx. 85 % | ISO 2471 |
Application and use
HERMA PP white digital has been specially developed for use on HP Indigo presses. A suitablel topcoat is required for this printing process. The film has been successfully tested at the HP Technical Centre and is characterised by excellent print quality and ink adhesion of HP electroinks.
The ink coverage of 200 % should not be exceeded, as this could lead to a lower ink adhesion.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Regulations concerning contact with food
HERMA PP white digital is in compliance with Commission Regulations (EC) no. 1935/2004 and (EU) no. 10/2011, amended up to Commission Regulation (EU) 2020/1245 on plastics and articles intended to come into contact with food as well as of Regulation (EC) no. 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food.
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0