Adhesive 95T
Permanent, rubber based adhesive
Technical data
Tack | extremely high | |
Peel adhesion | extremely high | |
Shear | very high | |
Minimum application temperature | -5 °C | |
Service temperature | -40 to 60 °C |
Application and use
95T is an extremely aggressive adhesive specially developed for extremely critical applications like tyre-labelling. Thanks to its extremely high tack and very high final adhesion 95T is also a perfect choice for labelling rough PE-containers, wood-based materials and very rough cardboard. 95T is provided with pattern gum to avoid adhesive bleed.
Processing
Due to the high coat-weight and the extremely high tack die cutting has to be considered very carefully. 95T does not allow for high die-cutting speeds. To avoid adhesive bleed winding tension should be kept under careful control. Matrix stripping is recommended to do immediately at / after die cutting.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0