HERMA PETP transparent matt (997)

Matt, transparent polyester film with topcoat

Technical data

Grammage approx. 75 g/m² ISO 536
Caliper approx. 60 µm ISO 534
Tensile stress MD approx. 120 N/mm² ISO 527
Tensile stress CD approx. 160 N/mm² ISO 527
Transparency approx. 85 % DIN 53147

Product information

Label material (film) - Issue 07.2023

PDF download

Service Information

Product Code Product Useable width Net width Min. quantity Industries & Application Caliper Grammage Articles in stock Ready for dispatch directly from stock

Application and use

Thanks to its special treatment the matt surface of HERMA PETP transparent matt offers an excellent print quality in screen, letterpress and flexo printing.

The film may also be printed with laser and thermal transfer printers and it is possible to write on the film with ballpoint pens, pencils etc.

HERMA PETP transparent matt suits perfectly for production of labels that have to be resistant to high temperature and moist environment (e.g. type plates).

In combination with our UV-acrylic adhesive 63B the film complies with BS 5609, Section 2 (resistance to seawater) and is thus also suitable for labelling of containers which are transported via sea route.

 

UL Approval

This material is listed by UL in combination with adhesive 63B under:

- MH26322 ("Marking and Labeling System Materials Component" PGGU2)

- MH26322 ("Marking and Labeling System Materials - Certified for Canada "PGGU8)

- MH26479 ("Printing Materials - Component "PGJI2)

- MH26497 ("Printing Materials Certified for Canada - Component "PGJI8)

 

 

Recommended storage

See HERMA website: www.herma.com/material/storage-conditions/

Disclaimer

All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.

HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0

Request sample

Just request your sample of the product via our form.

Is there a way we can support you?
If yes, please contact us.